Kitchen sink clogs—usually caused by grease or overworked garbage disposers can be easily removed in minutes with these simple tools and common-sense tips.
When the water in your kitchen sink won’t drain or drains slowly, don’t reach for the chemical drain cleaner. Instead, try this three-step method recommended by one of our favorite plumbers. The first two steps we’ll show you don’t even require you to remove the trap or take anything apart. If you’re lucky, all you’ll need is a bent coat hanger. But if the clog is in the trap or farther down the drain, you’ll need a 1/4-in. drain snake. You can buy an inexpensive snake that’s simply a cable running through a bent pipe that allows you to twist the cable, but we recommend spending a little more money for a cable that’s enclosed in a drum. This type is much easier to use.
Before you get started on any of our solutions, suck all the water out of the sink with a wet-dry shop vacuum or sponge it into a bucket. You’ll be able to see what you’re doing, and if you do have to disassemble plumbing, it’ll be less messy.
Read More Here.